SALT-AWAY’S
SALT BUILD-UP REMOVAL PROGRAM
FOR
ALL EXTERNAL SURFACE APPLICATIONS
- Notice:
These instructions are intended for use with Salt-Away only.
- Using these
instructions with other products may cause damage and may not produce desired
results.
- Salt-Away
is the most concentrated salt removing product on the market and has produced
desired results for many customers.
- Salt-Away’s
development of the formula included designing the product with the highest concentration
of ingredients meant to be diluted at very high ratios and still be effective.
- For
removing external salt build-up, Salt-Away works best by completely spraying the
equipment 4-6 times in sequence, waiting at least 24 hours between applications.
- Do
not rinse off. Rinsing ok after the last application, if desired.
- Applying
higher concentrated solutions of Salt-Away will not necessarily work better.
- The
number of applications may need to decrease or increase, depending on results.
- It
is reasonable to expect that that not all situations will respond to this method
of salt build-up removal. Removing salt from your equipment after every exposure
will prevent this build-up.
- Remember
that Salt-Away is a maintenance salt-removing product and cannot repair past damage
to any surface caused by salt corrosion, but can prevent future damage.
- Recommended
product for external salt build-up removal program: COMBO
KIT.
