SALT-AWAY CONCENTRATE FORMULA

 

Salt-Away's claims about its performance only applies to Salt-Away and the use of our equipment.

Our products are guaranteed to perform as we claim. Using another product with Salt-Away's equipment does not mean that other products will be as effective as Salt-Away.

The blend of chemicals used in Salt-Away are not the same as our com-petitors' chemicals. 

Special Secret Blend

• Salt-Away is a carefully selected blend of ingredients specifically chosen to provide the optimum concentration of well-known cleaning materials and surface-active agents, to provide salt removal from a wide variety of surfaces.

• There are no hydrocarbon solvents in the formula and the cleaning action is designed not to remove lubricating products.

• Included in Salt-Away are rinse aids and liquid and vapor corrosion inhibitors.

• The ingredients are considered non-hazardous, non-toxic, and biodegradable and, as such, discharging Salt-Away into normal drainage outlets is safe.

• Safe to use on virtually all surfaces, including Magnesium, Aluminum, Iron, Steel, Stainless Steel, Chrome, Paint, Gel Coat, Nylon, Isinglass, Vinyl, Plastic, Glass, Wood, Leather, Rubber, Canvas.

• Salt-Away is also safe to use near plants, pets, children and other living things.

Salt Removing Agent

• Salt-Away’s salt removing agent completely removes fresh salt and breaks down salt build-up.

• Its high, dense foaming action assists as an indicator to see where Salt-Away has been applied, and it also ‘clings’ to surfaces to slowly soak through the layers of salt.

• As the salt dissolves into the Salt-Away salt removing agent, the crystals are lifted into the solution.

• If Salt-Away is sprayed on the surface and not rinsed off, the water evaporates out of the solution and the salt crystals are embedded into the residue.

• The liquid and vapor corrosion inhibitors in the residue will not allow the salt crystals to attack the surface.

• If Salt-Away is rinsed off the surface, the salt crystals are lifted off the surface and washed away.

• A second application of Salt-Away is recommended for further protection.

• Salt-Away’s salt removing agent, which causes the foam, is non-hazardous.

• This foam dissipates within a few minutes.

• We are very concerned about environmental conditions, and we do not want our customers to perceive that any element of our product is hazardous.

• Further, we want our customers to keep a copy of our Material Safety Data Sheet (MSDS) on file. This document verifies that Salt-Away is not hazardous and is helpful to agencies who may not be familiar with our products.

• Contact Us to request an MSDS.

Rinse Aid

• Salt-Away’s advanced formula contains a new, popular rinse aid.

• This rinse aid performs while fresh water is being applied to rinse off equipment.

• While the fresh water is mixing with the Salt-Away solution, the rinse aid causes the mixture to ‘sheet off’ the surfaces, and keeps hard minerals from the rinse water from spotting the equipment.

Liquid and Vapor Corrosion Inhibitors

• The ingredient second highest in percentage content is Salt-Away’s corrosion inhibitors.

• Tested for 18 months, this corrosion inhibitor works in liquid solutions and vapor solutions.

• It is 100% non-hazardous and is a high-performance inhibitor which saves your equipment from rusting and corroding when Salt-Away is used on a regular basis.

Deep, Rich Blue Color

• With this deep, rich, blue color, it is very easy to see the strength of Salt-Away while being diluted.

• Shows concentration of product.

Product Concentration and Dilution Ratio

• Salt-Away is extremely concentrated.

• The Salt-Away Mixing Unit was used in the vast majority of the testing performed in the development of Salt-Away.

• Salt-Away is manufactured to be dispensed from the Mixing Unit at a ratio of 512 parts water to 1part Salt-Away.

• This dilution ratio is meant for salt water marine engine flushing and normal external salt removal on ANY surface, by means of dispensing with the Mixing Unit connected to a U.S. standard garden hose.

• Add 1-2 ounces of Salt-Away Concentrate to each gallon of water when immersing a salt-corroded part into a solution of Salt-Away and water.

• This dilution ratio is also recommended for boaters who want to immerse the lower unit of their outboard motor into a Salt-Away solution.

• Most of our testing data show problems of salt build-up are solved by using Salt-Away at the same dilution ratio referenced above, and repeating the application on a regular basis.

• We recommend our Salt Build-up Removal Program for build-up problems.

• Our recommended dilution ratio has always been 512 parts water to 1 part Salt-Away. Our New, Advanced, Enriched Formula, introduced in 2001, is much more concentrated than our Original Formula, thereby causing the Advanced Formula water ratio to Salt-Away to be much greater.

• Our recommendations are intended to be conservative.

INNOVATIVE CHARACTERISTICS